techimoto

So now that the Jeep is running and drivable we wanted to spruce the exterior up a bit.  We thought a nice change in color was in order,  and since we already have a white Jeep we decided to go with something a little more exotic, like, uh, yellow. After a bit of research we [...]

When we got the Jeep the transmission was slipping badly and was not drivable, because of this we wanted to rebuild a transmission we had pulled from our 88 Jeep Cherokee. 
We started by removing the transmission from the Jeep and carefully examining all the components, we took a close look at the torque converter and quickly noticed [...]

Now that the Jeep is registered we had to make a game plan of what we would do to the Jeep. Since the plan was to create a daily driver (DD) that is also highly capable off highway, because of this we wanted to lift the Jeep but also have a smooth ride on highway. 
After [...]

We started Project Code Yellow by searching for a proper donor vehicle, we wanted a Jeep Cherokee for this project as we have lots of previous experience with this model Jeep.  After searching Craigslist and other online sources for a cheap Jeep we found one that was about 100 miles away, the advertisement stated that it ran good and that [...]

Since Obama’s election, it’s been very quiet here at Techimoto. In truth, we’ve had nothing much to rant about! Bush has evidently found himself some other hobby than trying to run a country, most likely trying to figure out how the Dewey Decimal System will work in his presidential library and hitting neighborhood yard sales [...]

techimoto has been hard at work the past few months rebuilding a 1990 Jeep Cherokee Laredo giving it a second life. The project started with a search for the right donor vehicle, after a few weeks of looking we came up with a $500 broken down junker that was soon headed to the junk yard [...]

NOTE: I am currently trying to sell the CNC that is in this article, If you are interested please contact me at Max@9xnet.com.  Thanks for all your continued support!
Building your own CNC Router can be a fun and exciting project. CNC stands for Computer Numeral Control and is used to cut designs that were [...]